PUBLICATIONS
SN Patankar and FH
Froes
Formation of Nb3Sn using mechanically alloyed Nb-Sn
powder
SOLID STATE SCIENCES 6 (8): 887-890 AUG 2004
MDS Pirzada, SN Patankar and FH Froes
Mechanochemical processing
of nanocrystalline Ti-6Al-4V alloy
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS
SCIENCE 35A (6): 1899-1903 JUN 2004
SN Patankar, D. Zhang, G.
Adam and FH Froes.
Processing of yttrium-aluminum garnets under non-equilibrium conditions
JOURNAL OF ALLOYS AND COMPOUNDS 353 (1-2): 307-309 APR 7 2003
PB Trivedi, SN Patankar and FH Froes
Extension of solid solubility in binary Ti-Sc system
MATERIALS TECHNOLOGY 19 (4): 239-242 DEC 2004
L.Dias, B. Trindade, C. Coelho,
S.N. Patankar, C.
Draney and F.H. Sam Froes
Ti-Mg-Si alloys produced by
non-equilibrium processing methods: Mechanical alloying and sputtering
Materials Science and
Engineering A, v 364, n 1-2, p 273-280, Jan 15, 2004,
SN
Patankar, JP Escobedo JP, DP Field DP and FH. Froes
Superior superplastic behavior in fine-grained
Ti-6Al-4V sheet
JOURNAL OF ALLOYS AND COMPOUNDS 345 (1-2): 221-227 OCT 28 2002
PB Trivedi, EG Baburaj, SN Patankar and FH Froes
Grain-size control in Ti-48Al-2Cr-2Nb with yttrium additions
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL
METALLURGY AND MATERIALS SCIENCE 33 (8): 2729-2736 AUG 2002
M.M. Qureshi, S.N. Patankar and
F.H. Froes
Development of low density ternary
Ti-Mg-B alloy via mechanical alloying
Materials Technology, v 17, n
3, p 160-164, September, 2002
SN Patankar,
CT Lim and MJ Tan
Superplastic forming of duplex stainless steel
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL
METALLURGY AND MATERIALS SCIENCE 31 (9): 2394-2396 SEP 2000
PB Trivedi, SN Patankar, EG Baburaj and FH Froes
Formation of Al-Y oxide during
processing of gamma-TiAl
JOURNAL OF ALLOYS AND COMPOUNDS 340 (1-2): 231-235
JUN 26 2002
SN Patankar
and MJ Tan
Influence of alpha casing on superplastic deformation of Ti-6Al-4V
JOURNAL OF ENGINEERING MATERIALS AND
TECHNOLOGY-TRANSACTIONS OF THE ASME 123 (1): 144-147 JAN 2001
SN Patankar
and MJ Tan
Sigma phase precipitation during superplastic forming of duplex stainless steel
Materials at High
Temperatures, v 19, n 1, p 41-44, 2002
S.N. Patankar and F.H. Froes
Enhanced Superlastic
Forming Of Ti-6Al-4V By Alloying With Hydrogen
Materials Technology (UK), 16, 242-245, 2001
SN Patankar
and MJ Tan
Role of reinforcement in sintering of SiC/316L stainless steel composite
POWDER METALLURGY 43 (4): 350-352, 2000
Times Cited:
5
JJ Lewandowski, B Berger, JD Rigney
and SN Patankar
Effects of dislocation substructure on strength and
toughness in polycrystalline NiAl processed via
low-temperature hydrostatic extrusion
PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED
MATTER STRUCTURE DEFECTS AND MECHANICAL PROPERTIES 78 (3): 643-656, SEP 1998
SN Patankar and MJ Tan
Strain rate insensitive plasticity in aluminum
alloy 5083
SCRIPTA MATERIALIA 38 (8): 1255-1261 MAR 13, 1998
SN Patankar and MJ Tan
"Superplastic
forming" of commercial purity aluminum
SCRIPTA MATERIALIA 38 (1): 145-148, DEC 18 1997
Times Cited:
6
J.D. RIGNEY, S.N. PATANKAR and J.J.
LEWANDOWSKI
Properties of monolithic and composite NiAl processed by hydrostatic extrusion and vacuum
hot-pressing
Composites science and technology
vol. 52, n 2, pp. 163-172, 1994
C Suryanarayana, SN Patankar, D. Mukhopadhyay and FH
Froes
GRAIN-SIZE EFFECTS IN NANOCRYSTALLINE
MATERIALS
JOURNAL OF MATERIALS RESEARCH 7 (8): 2114-2118, AUG
1992
SN Patankar,
SQ Xiao, JJ Lewandowski and AH Heuer
THE MECHANISM OF MECHANICAL ALLOYING OF
MOSI2
JOURNAL OF MATERIALS RESEARCH 8 (6): 1311-1316 JUN
1993
SN Patankar, C Suryanarayana, D. Blackketter and
FH Froes
THERMALLY INDUCED RESIDUAL-STRESSES IN
CARBON FIBER-REINFORCED ALUMINUM-MATRIX COMPOSITES
JOURNAL OF MATERIALS SCIENCE LETTERS 11 (13):
947-949, JUL 1 1992
SN Patankar, C Suryanarayana, D Upadhyay and FH
Froes
Influence of tin dioxide interphase on the residual stresses in alumina fiber/glass
composites. Reply to the comments by Venkatesh et al
Scripta Metallurgica
et Materialia, v 26, n
5, p 861-864, Mar 1, 1992
SN Patankar, C Suryanarayana and FH Froes
INFLUENCE OF TIN DIOXIDE INTERPHASE ON THE
RESIDUAL-STRESSES IN ALUMINA FIBER GLASS COMPOSITES
SCRIPTA METALLURGICA ET MATERIALIA 25 (8):
1787-1792, AUG 1991
Times Cited:
10
SN Patankar, R Venkatesh and KK Chawla
EFFECT OF TIN DIOXIDE COATING ON TENSILE-STRENGTH
OF ALUMINA FIBERS
SCRIPTA METALLURGICA ET MATERIALIA 25 (2): 361-366,
FEB 1991
SN Patankar, V Gopinathan and P Ramakrishnan
Chemical interactions at the carbon
fiber aluminium interface
Scripta Metallurgica
et Materialia, v 24, n 11, p 2197-2202, Nov 1990
SN Patankar
WEIBULL DISTRIBUTION AS APPLIED TO
CERAMIC FIBERS
JOURNAL OF MATERIALS SCIENCE LETTERS 10 (20):
1176-1181, OCT 15 1991
SN Patankar, V Gopinathan and P Ramakrishnan
STUDIES ON CARBON-FIBER REINFORCED ALUMINUM
COMPOSITE PROCESSED USING PRETREATED CARBON-FIBERS
JOURNAL OF MATERIALS SCIENCE 26 (15): 4196-4202,
AUG 1 1991
SN Patankar, V Gopinathan and P Ramakrishnan
PROCESSING OF CARBON-FIBER REINFORCED ALUMINUM
COMPOSITE USING K2ZRF6 TREATED CARBON-FIBERS - A DEGRADATION STUDY
JOURNAL OF MATERIALS SCIENCE LETTERS 9 (8):
912-913, AUG 1990
SN Patankar, AN Tiwari and V. Gopinathan
EFFECT OF PRE-ALUMINIZING CONDITIONS ON
THE INTERFACIAL SHEAR STRENGTHS IN CAST ALUMINIUM-STEEL WIRE COMPOSITES
TRANSACTIONS OF THE JAPAN INSTITUTE OF METALS 26
(10): 772-777, 1985