CONFERENCE / PROCEEDINGS
1.
Studies on the hot pressing of SiC fibre reinforced
aluminium composites
Iyer, S.A. (Indian Inst of Technology);
Patankar, S.N.; Gopinathan, V.; Ramakrishnan, P. Source: Key
Engineering Materials, v 29-31, 1989, p 769-773
Conference: Powder Metallurgy and Related High
Temperature Materials: Fourth International Conference on Powder Metallurgy and
Related High Temperature Materials, Dec 7-10 1987, Bombay, India Sponsor: Board of Research in Nuclear Sciences; British India
Steel Inc; Council of Scientific & Industrial Research; Defense Research
& Development Organisation, Dep of Science & Technology; Hind High
Vacuum Co; et al
2.Effect of processing on the high temperature
mechanical properties of MoSi2
Patankar, S.N. (Case Western Reserve Univ); Lewandowski, J.J. Source: Materials Research Society
Symposium Proceedings, v 288, 1993, p 829-834
Conference:
Proceedings of the 5th Symposium on High-Temperature Ordered Intermetallic
Alloys, Nov 30-Dec 3 1992, Boston, MA, USA
3.Processing-microstructure-property
relationships in polycrystalline MoSi2
Hardwick, D.A. (Rockwell Int Science Cent); Martin, P.L.; Patankar, S.N.; Lewandowski, J.J. Source: Proc First Int Symp Struct
Intermet, 1993, p 665-674
Conference:
Proceedings of the First International Symposium on Structural Intermetallics,
Sep 26-30 1993, Champion, PA, USA Sponsor:
TMS High Temperature Alloys Committee
4.Hydrostatic extrusion of 2014 and 6061
composites
Patankar, S.N.; Grow, A.L.; Margevicius, R.W.; Lewandowski, J.J. Source: Minerals, Metals &
Materials Soc (TMS), 1994, p 733
Conference: Proceedings of the
Symposium on Processing and Fabrication of Advanced Materials, Oct 17-21 1993,
Pittsburgh, PA, USA Sponsor:
SMD; TMS
5.Optical emission spectroscopy correlations to
plasma nitriding surface treatments for process optimization and control
Young, R.B. (IMAP, Dept. of Mat. Sci. and Engineering, University of
Idaho); Patankar, S.; Prisbrey, K.A.; Froes, F.H. Source: TMS Annual Meeting, Surface
Engineering in Materials Science II, 2003, p 303-308
Conference: Surface
Engineering: In Materials Science II, Mar 2-6 2003, San Diego, CA, United
States Sponsor: The Surface
Engineering Committee of the MPMD of TMS
6.Low-cost CP-titanium and Ti-6Al-4V alloys
Moxson, V.S. (ADMA Products Inc); Qazi, J.I.; Patankar, S.N.; Senkov, O.N.; Froes, F.H. Source: Key Engineering Materials,
v 230-232, 2002, p 339-343
Conference: Advanced
Materials Forum I: Proceedings of the 1st International Materials Symposium,
Apr 9-11 2001, Coimbra, Portugal
7.Phase transformations in the Ti-6Al-4V -
Hydrogen system
Qazi, J.I. (Inst. for Mat. and Adv. Processes, University of Idaho);
Rahim, J.; Senkov, O.N.; Patankar, S.N.; Froes, F.H. Source: Key Engineering Materials,
v 230-232, 2002, p 344-349
Conference: Advanced
Materials Forum I: Proceedings of the 1st International Materials Symposium,
Apr 9-11 2001, Coimbra, Portugal
8. F.H. (Sam) Froes, S.N. Patankar and F. Sun, “The Mechanochemical Processing of Light Metals”, Proceedings of the 4th International Conference on Mechanochemistry of Mechanical Alloying (INCOME 2003), Braunschweig, Germany, 7-11 Sept. 2003, eds. K.D. Becker and V. Sepelak