back to Idaho T2 Center video topics
CN0050 22:00 Concrete Pavement Overlays
Strategic Highway Research Program, June 1994
This tape gives a detailed presentation of materials, methods, and procedures for banded overlays and non-banded overlays. Methods for choosing procedures and related testing methods are discussed.
CN0100 10:00 Early Opening of Full-Depth Concrete Repairs
Strategic Highway Research Program, June 1994
This video reviews fast track operations for full-depth concrete repairs. Planning, scheduling and evaluating are covered.
CN0150 25:00 Freeze-Thaw Testing
Strategic Highway Research Program, June 1994
Freezing and thawing are some causes of concrete deterioration. This video covers the causes and prevention of freeze/thaw as well as conventional and new tests.
CN0175 52:00 Fit to be Tied: Retrofitting PCC Pavement Dowel Bars Dowel Bar Insertions for Load Transfer at Mid Panel Crack Retrofitted Load Washington State DOT, FHWA, USDOT
This video is to outline the procedure for retrofitting plain jointed PCC pavement and its use as a cost effective measure for the life of the pavement.
CN0200 18:00 Full-Depth Repair of Jointed Concrete
Pavement
Strategic Highway Research Program, June 1994
Five major topics relating to repair of jointed concrete pavement: distress requiring full depth repair, field survey, transverse joint design, materials and repair procedures.
CN0250 25:00 Incidental Concrete Structures Inspection
International Road Federation
This video is directed at people who will need to inspect concrete work. Can be used as a training video.
CN0300 10:00 Introduction to Rehabilitation of Highway
Concrete
Strategic Highway Research Program, June 1994
This video is an introduction to and previews four tapes entitled "Quality Control of Concrete on Site.” The importance of obtaining quality control of concrete in ME repair and rehabilitation of street and highway concrete is discussed.
CN0450 15:00 Partial-Depth Repair of Concrete Pavement
Strategic Highway Research Program, June 1994
This video demonstrates repair of spells at joints and mid‑sections of concrete pavements. Materials and procedures are shown for repair of damage limited to the upper third of the concrete slab. High early‑strength concrete mixes are discussed, and the repair process is demonstrated. Tests are shown for deterioration and determination of repair boundaries. Surface preparation is demonstrated, including options for removal of material, cleaning, and application of a bonding agent to the repair site. Finally, placement and consolidation of the concrete, finishing, and curing procedures are presented.
CN0500 27:20 Portland Cement Concrete "Truck Mix Plants"
Federal Highway Administration
This video shows the general operation of a typical truck mix plant and provides guidance on those operations that should be inspected to assure that quality concrete is being produced. It gives an overview of the materials used to make concrete and reviews the batching process, charging of the trucks, mixing of materials and truck clean‑up. Utilizes both lecture and demonstration instructional format.
CN0550 14:00 Quality Control of Concrete Site - Part 1
Strategic Highway Research Program, June 1994
This video discusses methods for the field sampling and testing of concrete for temperature and slump.
CN0600 17:00 Quality Control of Concrete Site - Part 2
Strategic Highway Research Program, June 1994
This video discusses methods for the field sampling and testing of concrete for air content and unit weight.
CN0650 18:00 Quality Control of Concrete Site - Part 3
Strategic Highway Research Program, June 1994
This video presents new methods developed by SHRP for the field sampling and testing of concrete. Testing is divided into two areas: As‑Delivered Concrete, using water content measurement and thermal effects evaluation, and As‑Placed Concrete using maturity monitoring.
CN0700 18:00 Quality Control of Concrete Site - Part 4
Strategic Highway Research Program, June 1994
This video presents new methods developed by SHRP for the field sampling and testing of concrete. Additional testing methods for As‑Placed Concrete include temperature‑ matched curing, pulse velocity testing, and nuclear density testing.
CN0750 8:00 Ultra-thin Whitetopping: Today’s Choice for
Durable Pavement Overlays
National Ready Mixed Concrete Association/American Concrete Pavement Association
Whitetopping consists of putting a thin layer of fiber‑reinforced concrete over a specially prepared asphalt surface. This promotional video explains the process and discusses the effectiveness of this type of overlay.